Two screens on their stock stands eat most of a desk. A dual monitor stand lifts both off the surface, lines them up at eye height and gives you back room for a keyboard and the obligatory mug. After weeks with UK roundups, spec sheets and amazon.co.uk listings, the best dual monitor stand for most people is the Huanuo HNDS6-E, a clamp-or-grommet arm for two 13- to 32-inch screens.
I didn't test these hands-on. The Huanuo, Ergotron, NB North Bayou and Vivo picks have editorial backing; the rest are judged on their listings. The list covers side-by-side arms, vertical stackers and one freestanding stand.

Where each stand fits, and where it falls short.
#1 · Editor's Choice
Judge a dual monitor stand by how little you think about it afterwards, and the Huanuo HNDS6-E is the one I'd buy. It takes two 13- to 32-inch screens at up to 9kg each, on independent arms with -30° to +85° tilt and full rotation for portrait use. It clamps to desks up to 70mm thick or bolts through a grommet hole. Huanuo's dual arms turn up in two roundups. It isn't flawless, though. The spec table says 27-inch maximum while the title says 32, so I'd treat 32-inch panels as its limit (my two 27-inch screens would sit comfortably inside it).
The verdict: The safest all-round buy for two side-by-side screens.
#2 · Runner-Up
Narrow desk, height to spare? Stacking is the answer, and the Ergotron LX Vertical Stacking arm is the premium way to do it. It puts one screen above the other on a 58 cm tall pole, holding two monitors up to 40-inch at 3.2-10kg each, with 33 cm of lift and 65 cm of extension. The clamp fits desk edges 1.6 to 6.6 cm thick, a grommet plate is included, and the listing mentions a 10-year warranty. But it costs far more than anything else here, and in my sloping-ceiling spare room the top screen would sit right under the eaves.
The verdict: The best stacker here, budget and headroom permitting.
#3 · Best Gas Spring
Most cheap dual arms make you loosen a collar to change height. The NB North Bayou F195A uses gas springs instead, so a screen moves with one hand and stays put. It's built for 22- to 32-inch monitors at 3-12kg each, with 345mm of lift and USB hub ports in the base. NB's dual arms appear in two roundups. Two caveats. It's an international listing, sold from abroad under separate terms, and the 118mm VESA plate may need longer screws and spacers on screens with recessed holes. A screen under 3kg also sits below the springs' rated range.
The verdict: The gas spring arm to get if your screens sit in its 22- to 32-inch range.
#4 · Best Stacking Value
I'll be straight: no roundup covered this Fellowes arm, so it's here on its listing. It's a vertical stacking dual arm for two 32-inch monitors at up to 8kg per arm, with gas springs, 180° pan and 360° rotation. Fellowes gives real dimensions: 50.5cm of reach and 41.5cm from desk to monitor centre at the lowest pole position. It's FIRA accredited to EN ISO 9241-8 and has two USB ports and a 3-year warranty. The title and description disagree on tilt, so I've left that out. Next to the Ergotron LX, it's the stacker for a mid-range budget.
The verdict: A sensible office stacker, backed by its spec sheet rather than reviewers.
#5 · Best Budget
Buy this if you want two screens off the desk for the least outlay and don't mind some fiddling. The Vivo STAND-V002 is a cheap dual monitor stand in the old pole style: steel arms holding 13- to 30-inch screens at up to 10kg each, with a generous ±90° tilt. The clamp takes desks up to 8cm thick, or use a grommet, and cable clips run along the arms. There's no gas spring, so height changes mean sliding the arms down the pole by hand, and the clamp won't grip bevelled desk edges. Set it once and leave it.
The verdict: The budget pick, as long as you set the height once and forget it.
#6 · Best for Shallow Desks
My first rented box room had a desk barely deep enough for a keyboard and a mug. The Kensington SmartFit Space Saving arm is built for exactly that. It's the best dual monitor stand for a small desk here, made for shallow spaces and two 27-inch monitors at up to 8kg each. Height runs 239-470mm, the clamp fits desks up to 85mm, and it works on sit-stand desks. One description line claims 32-inch support; the title says 27, so go by that. Tilt and swivel stop at ±10°, far less than the Vivo, and nothing I read reviewed it.
The verdict: Pick it for a shallow desk; skip it if you like tilting screens a lot.
#7 · Best for Large Screens
Let's get the awkward bit out of the way: the MX900 weighs 5.35 kg on its own, so don't fit it alone while holding a monitor. Once it's up, it's the arm for big screens. Invision rates it for 24- to 35-inch monitors at 2-15kg each, the highest load here, with gas-assisted long arms and a die-cast alloy frame. Screens under 24-inch fall outside its range, where the Duronic DM252 makes more sense. It's a listing-led pick; I found no roundup coverage.
The verdict: The one for heavy 34- and 35-inch screens; bring a helper.
#8 · Easiest Tension Setup
The tension indicator is the clever part. Most spring arms leave you guessing whether a screen will creep up or sag; the BenQ ErgoArm BDL01 shows you on a built-in gauge. It holds two screens up to 35-inch at 2 to 11 kg per arm, using a mechanical spring BenQ says is tested for 20,000 cycles. The desk range is narrow, though: 10-50mm, so a chunky solid-wood worktop may be too deep. It also sits nearer the premium end than the NB North Bayou, with no editorial coverage I could find.
The verdict: Worth it if you hate fiddling with spring tension.
#9 · Best Cable Management
For a tidy desk on a small budget, the Duronic DM252 makes sense. Its party trick is cable management: four hooks along the arms, one central hook and two straps keep HDMI and power leads out of sight. It takes 13- to 27-inch screens at 8kg per arm, in cold-rolled steel. It's clamp-only, though, so a desk pushed against a wall needs a gap behind it, and height means sliding each arm along the pole. Fine for a pair of 24-inch screens. Not for a 32.
The verdict: A tidy, no-frills clamp for two smaller screens.
#10 · Best Freestanding
No clamp, no grommet, no drilling. The ErGear EGCM3-E is the freestanding pick: a widened steel base sits on the desk, so edges, lips and thickness stop mattering. Each arm carries up to 8kg, screens can be anything up to 32-inch, and the wiring is concealed. The trade-off is space and stability, since the base takes up room a clamp wouldn't and everything relies on its weight. Good for a rented flat; otherwise the Huanuo is the better buy.
The verdict: The answer when clamping isn't an option.
We didn't test these stands hands-on or in a lab. The ranking is built from UK and international editorial roundups, manufacturer spec sheets and amazon.co.uk listings. Huanuo, Ergotron, NB North Bayou and Vivo arms appear in those roundups; the other six are judged on their published specs. Where a listing contradicted its own title, as with the Huanuo's and the Kensington's maximum screen sizes, I followed the title.
What we compared for every stand:
How we weighted the scores:
Most stands here use a C-clamp, which grips the back edge of the desk. That needs a flat edge and some clearance behind, awkward if your desk is pushed against a wall or radiator. Check the clamp range: the Huanuo takes up to 70mm, the Duronic 10-88mm and the BenQ only 10-50mm. Bevelled edges are a common snag, and the Vivo listing rules them out.
A grommet mount bolts through a hole in the desktop instead, which means drilling unless your desk has a cable port. A freestanding stand, like the ErGear, needs neither; it sits on a weighted base, at the cost of desk space and some stability.
Then there's layout. Side-by-side arms suit two similar screens. Vertical stacking arms (the Ergotron LX, the Fellowes and the StarTech.com) put one screen above the other, freeing width on a narrow desk at the cost of looking up.
Look up each screen's weight without its stand and check the back for a VESA pattern; almost every arm here supports 75x75mm and 100x100mm. Curved screens often have recessed mounting holes, which is why NB North Bayou warns you may need spacers. Then check the size range. A dual monitor arm rated for 13- to 27-inch screens is no place for a 34-inch ultrawide, and arms with a high minimum, such as the Invision, won't suit a small screen.
Weight limits are per arm. Gas spring arms, like the NB North Bayou, Invision and Bontec, let you push a screen up or down and have it stay there, which is lovely on a sit-stand desk. Pole-mounted stands such as the Vivo and Duronic are cheaper and simpler, but height is set by sliding the arm along the pole, so you do it once.
Searching for a dual monitor stand with laptop tray? None of these includes one; a separate laptop riser is simpler. For cable management, the Duronic, Bontec and BenQ have proper routing.
On budget, the Mountup, Vivo, Duronic and ErGear sit at the entry level, the Huanuo, Bontec, Acer, Kensington and Invision are mid-range, and the NB North Bayou, Fellowes, BenQ and Ergotron are the premium end. If you have two screens of 27-inch or less and a normal desk edge, buy the Huanuo HNDS6-E and call it a day. (Measure the desk first. Twice.)
| Product | Screen Size | Load per Arm | Mounting | Our Score |
|---|---|---|---|---|
| Huanuo HNDS6-E Dual Monitor Arm Desk Mount | 13-32-inch monitors | up to 9kg | C-clamp and grommet | 9.9 |
| Ergotron LX Vertical Stacking Dual Monitor Arm 45-509-224 | up to 40-inch monitors | 3.2-10kg | desk clamp and grommet | 9.7 |
| NB North Bayou F195A Gas Spring Dual Monitor Stand | 22-32-inch monitors | 3-12kg | C-clamp and grommet | 9.5 |
| Fellowes Platinum Series Dual Stacking Monitor Arm | up to 32-inch monitors | up to 8kg | clamp or grommet | 9.3 |
| Vivo Heavy Duty Dual Monitor Desk Mount STAND-V002 | 13-30-inch monitors | up to 10kg | C-clamp and grommet | 9.1 |
| Kensington SmartFit Space-Saving Dual Monitor Arm K55513WW | up to 27-inch monitors | up to 8kg | desk clamp and grommet | 8.9 |
| Invision MX900 Gas-Assisted Dual Monitor Arm | 24-35-inch monitors | 2-15kg | desktop clamp | 8.7 |
| BenQ ErgoArm BDL01 Dual Monitor Arm | up to 35-inch monitors | up to 11kg | C Clamp or grommet | 8.5 |
| Duronic DM252 Dual Monitor Arm Desk Mount | 13-27-inch monitors | up to 8kg | C-Clamp | 8.3 |
| ErGear Freestanding Dual Monitor Stand EGCM3-E | 13-32-inch monitors | up to 8kg | no clamp needed | 8.2 |
For most desks, the Huanuo HNDS6-E is the one I'd buy. It holds two 13- to 32-inch screens at up to 9kg each and fits by clamp or grommet. On a narrow desk, a stacking arm like the Ergotron LX makes more sense.
Usually, but check three things first. Measure the desktop thickness against the clamp range, look for a flat back edge without a lip, and leave clearance behind. If the desk sits tight against a wall, use a grommet hole or a freestanding stand.
Look at the back of the monitor for four screw holes in a square. Most stands here take VESA 75x75mm and 100x100mm patterns. Then check the screen's weight, without its own stand, against the per-arm limit.
Yes, as long as both sit inside the stand's size and weight range. Independent arms, like the Huanuo's or Duronic's, make it easier to line up the top edges. Gas spring arms need tension set separately for each screen.
They're easier to live with, not automatically better. Gas springs let you move screens with one hand, which suits sit-stand desks. Pole-mounted stands like the Vivo are cheaper and simpler, but height means loosening and sliding each arm.
Sometimes. A premium arm like the Ergotron LX buys a wider size range, longer reach and a long warranty. For two ordinary 24- or 27-inch monitors, a mid-range arm such as the Huanuo covers the job.
For two side-by-side screens on a normal desk, the Huanuo HNDS6-E is the one I'd buy. Short on width? The Ergotron LX stacks them, and the Fellowes does it for less. Can't clamp or drill at all? The ErGear freestanding stand is the way round it.
As an Amazon Associate I earn from qualifying purchases. See our affiliate disclosure for details. Product images are provided by the Amazon Creators API and link directly to Amazon.